| Electrical |
240 volts |
|
1/12hp |
|
50Hz |
|
0.8 Amps |
|
2 metre, 3 pin power cable |
| Compressor |
Silent running |
|
Hermetically sealed |
|
Automatic overload |
| Condenser |
Fan assisted rifle bore |
| Refrigeration |
Non-toxic, non flammable,
R134A gas charge |
| Temperature
Control |
Capillary controlled factory
pre-set thermostat |
| Tank |
1.5 litre stainless stell |
| Tank
Inlet |
1/4" O.D. Suitable
for John Guest fitting or brass union (not supplied) |
| Tank
Outlet |
1/4" O.D. Suitable
for John Guest fitting or brass union (not supplied) |
| Tank
Drain |
1/4" O.D. John Guest
blanking plug fitted. |
| Insulation |
Extra high density foam
for increased cooling efficiency enabling longer retention of lower temperatures |
| Chassis |
1.5 mm galvanised steel |
| Case |
0.55mm appliance white Colorbond
steel |
| Dry
Weight |
13 kg. |
| Filled
Weight |
14.75 kg. |
| Installation |
Cupboard must include a
suitable door vent adjacent to fan aperture. (Unit may be reversed with
vent in the rear of the cupboard wall if necessary. |